| Tidland E-Knifeholder |
| |
| |
E-Knifeholder |
The industry’ s first all-electronic
knifeholder increases accuracy and
consistency by eliminating guesswork. |
| |
| Tidland Model W19 – Ultra-Narrow Shear Slitting Knifeholder |
|
| |
| |
Tidland
Model W19 |
The Tidland Model W19 knifeholder combines all the advantages of the Tidland swing cartridge with a rigid and robust design, achieving a minimum slit width of only 19mm, while delivering best slit quality and extended blade life |
| |
| Tidland “C Series” Knifeholders |
| |
| |
Tidland “C Series” Knifeholders |
Available in three sizes to accommodate a wide range of slitting materials & web speed, for shear, crush and razor slitting.
|
| |
Class I “C Series” Series Knifeholder |
Suitable for down to 25mm minimum slit width, the Class I is used for light converting applications, flexible packaging and film
|
| |
Class II “C Series” Knifeholder |
With a 50mm minimum slit width, the Class II is used with papers, coated papers, foils, fine printing papers, chrome-coated, poly coated, light paperboard, Non-wovens, all film applications etc.
|
| |
Class III “C Series” Knifeholder |
Class III is used in converting and mill finishing heavy duty operations, typically in high speed winding, with materials such as coated and non-coated papers and boards, newsprint, kraft papers, chipboard, roofing felt, floor covering, etc.
|
| Performance Series Knifeholders |
| |
| |
Performance Series Knifeholders“ |
It is available as Manual and Automatic version, to fit the requirements of any applications. Three sizes are available to accommodate a wide range of slitting materials & web speed, for shear, crush and razor slitting.
|
| |
Class I Performance Series Knifeholder |
With a minimum slit width of 25mm, the Class I is used for light converting applications, flexible packaging and film.
|
| |
Class II Performance Series Knifeholder |
With a 25mm minimum slit width, the Class II is used with papers, coated papers, foils, fine printing papers, chrome-coated, poly coated, light paperboard, Non-wovens, all film applications etc.
|
| |
Class III Performance Series Knifeholder |
Class III is used in heavy duty converting and mill finishing operations, typically in high speed winding, with materials such as coated and non-coated papers and boards, newsprint, kraft papers, chipboard, roofing felt, floor covering, etc.
|
| |
Crush (Score) Slitter Knifeholder |
Durable and affordable quick clamp knifeholders for easy installation, adjustment and maintenance, with a minimum slit width of 11mm, with mounting adapters to fit into any existing installation.
|
| |
DMS2 – Digital Measurement System |
Easy to use position measuring device for quick and accurate manual knife positioning with digital display, that can be easily retrofitted on existing equipment.
|
| |
Slitter shafts |
Slitter shafts hold bottom knife rings (anvils) in the slitting section firmly in place, while allowing for easy and precise repositioning of the rings.
|
| Slitting Systems |
| |
| |
„Edge Trim“ |
Self contained edge shear slitting system
Tidland edge trim systems are available for high and low speed application, in mill duty and CVT versions, easy to retrofit on any existing machine and process. Automatic positioning is also available as option.
|
| |
Hitchhiker |
Mechanically Linked Slitting System
Tidland hitchhiker systems are available for high and low speed application, in mill duty and CVT versions, easy to retrofit on any existing machine and process. Automatic positioning is also available as option.
|
| |
MSP – E |
Modular Slitting Positioning System
The MSP-E slitting positioning system can be easily retrofitted on any existing slitter rewinder. The system features absolute encoder on each slit carriage, for quick simultaneous bi-direction positioning of all slits. It can be also delivered as manual system with option to upgrade to automatic.
|
| Slitting Accessories |
| |
| |
Blades & Regrinding Service |
Tidland develops and supplies blades for any applications and offers regrinding services. |
